Why Finland's Education System Works

Not too long ago, Finland's education system was comparable to that in the U.S. How they changed their system is interesting, because by having "less" school they are achieving greater results. In the U.S., the system of "doing what you hate longer and harder" seems to be the prevailing logic driving the "scientific test-results" orientation to achievement. Both systems are multi-cultural and multi-lingual and have special populations served in the general education setting.

U.S. Approach To Reform

Children must enroll in school (kindergarten or first grade) at age 5. Many children have had preschool experiences because parents work or they are qualified for Head Start, Early Start, Even Start and other programs. Preschool standards involve readiness skills (standards directed), but not all children receive such instruction. Direct reading (decoding) instruction begins in kindergarten and ends in second grade. State (and federal) standards direct what instruction children receive from kindergarten through high school and in higher education settings (technical/vocational schools and colleges/universities). Children must remain in school until they reach the age of dropping out (varies by state but usually between 16 and 18 years of age) or they graduate by meeting all their state's requirements. Standards, formal testing and statistics drive decision making by central administrators not in contact with students.

Finnish Approach To Reform

Children enroll in school at age 7, but they are given several years of preschool experiences which focus on language and physical development. The schools tend to be small because population centers are few; usually the schools have 300-400 students. Local teachers control their schools and curricula; they spend some of their work day developing and/or preparing materials to be used. Their school day is shorter than in the U.S. and they spend a lot of time outdoors, either in play or in applied "work" in the outdoor setting. Students attend elementary schools for 5-7 years, at which point they attend either a vocational schools or a higher education schools. Student skills and interests drive local decision making by teachers working with students.

What Are The Critical Differences?

The critical differences are:

· Preschool experiences are different: the U.S. focus on readiness (cognitive) skills development for reading and math, the Finnish focus on developmental skills in language and physical development. This translates into developmental readiness for instruction (Finland) or struggle to achieve (U.S.).

· School sizes differ: The U.S. consolidates and usually has 500+/school, the Finnish have few students so everyone receives attention. This translates into emotional security (Finland) or insecurity (U.S.).

· Children start reading instruction at different ages: the U.S. at age 5, the Finnish at age 7. This translates into being neurologically ready for instruction (Finland) or compensating with taxed memory skills (U.S.).

· Vocational schools are options for education in early adolescence. This translates into motivation (Finland) or non-motivational (U.S.).

· Decisions are based on testing/statistics (U.S.) or motivation and interests (Finland).

Conclusions

Focusing on behaviors and achievements for guiding change eliminates the humanness of education: interest, motivation, purpose. No matter how anyone looks at it, the U.S. system is a failure. Perhaps those making the decisions should relinquish the controls and let teachers who work with students and know what they need and want to learn make the decisions. Instead of rushing children to early achievement, maybe those who know about what happens to children developmentally will start driving the reforms.

Jennifer Little, Ph.D.

All children can succeed in school. Parents can help their children by teaching the foundational skills that schools presume children have. Without the foundation for schools' academic instruction, children needlessly struggle and/or fail. Their future becomes affected because they then believe they are less than others, not able to succeed or achieve or provide for themselves or their families. Visit http://parentsteachkids.com to learn how to directly help your child and http://easyschoolsuccess.com to learn what is needed for education reform efforts to be successful.

A High Quality Training for Vocational Education and Training System Through AQTF

People now recognized the importance of having high quality training and assessment services for those who are clients of Australia's vocational education and training system. Conditions and standards are now being given as an initial registration of new training providers which also strengthen the requirements for those of ongoing registrations which include stronger financial viability and protection conditions. AQTF or Australian Quality Training Framework usually includes quality indicators that are designed to provide information about a Registered Training Organization performance. There are three indicators which are learner engagement, employer satisfaction and competency completion.a

In order for a training organization to be registered, they must apply in the area where the organization has its head office. Registration is usually up to five years unless it is being cancelled or suspended. The training organization must pay the required fees that are being given. National consistency, responsive management systems and client service are the main focus of the AQTF standards for state and territory course accrediting bodies. If you are not able to comply with the new Australian Quality Training Framework, this will mean that your application for registration will be refused which can also result in a range of sanctions.

An individual who is in the position to influence the management of a registered training organization in any possible way should meet the individual characteristics and past behavior standards in order to gain the fit and proper requirement that is required in a person. This can be achieved by registering in the AQTF standards. There are a lot of test that is being given in order to prove whether an individual is qualified or not. If ever a person fails to meet the requirements that are being given, this may cause an impact with regards to the suitability of the individual to contribute in the delivery of education and training. These requirements may include the past criminal convictions of a person, a history of personal bankruptcy and many more.

The AVETMISS compliance or otherwise known as the Australian Vocational Education Training Management Information Statistical Standard provides a national data that ensures the consistent and accurate capture of VET information about the students, their courses and the qualifications that are completed. In addition, it provides answers about students in the VET system with regards to their identities, where they study and what they study. The applicants for initial registration do not usually have any performance history.

Applicants can however be assessed for financial viability and government risks which is based on the assumptions that are underlying their financial projections, their proposed organizational model and business plans. Furthermore, these risk indicators are assessed to determine an initial rating which will determine the level of future monitoring.

The author writes for http://www.bluegemexplore.com.au/ which provides information regarding AQTF.

Learning Management Systems Facilitating Education in HealthCare and Other Fields

Rapid advances are being made in various fields like law, government, accounting and medicine and only a learning management system could help improve the efficiency of continuing education. There is a vast amount of information out there. Every single day more and more information is getting added to this pool, as a result of extensive research. Medicine, especially offers a great variety of research topics. Also, continuing education could benefit one to expand their career and job profile. A good example would be that of nurses doing their post graduation.

The wealth of information could be made available at one's fingertips through the learning management system. This system of learning has got lot of advantages. To start with working people like nurses, could choose their own time to educate themselves. The flexibility with the schedule enables people to take lessons when they are more relaxed rather than being under work pressure or strain of impending deadlines. The information through this portal is available to them at a click. It is easily accessible, and has various features to track the pace and lessons one has covered.

Once signed up at this learning management system nurses can imbibe the information in the portal, which is clear and concise. The same information could be obtained online or through books. But the greatest disadvantage is that this knowledge is scattered. Besides, it could be too elaborate for one's purpose. One needs to do lot of hard work in digging out the information and then filtering it based on individual criteria. To avoid this inconvenience more and more organizations are adapting the features of a learning system, whose portals have tremendous features that could be customized to make tailor made learning courses for the benefit of those undergoing the continuing education.

Another important feature of this learning system is its interactive nature. Various students could participate in discussion boards to share information they have. Healthy discussions and knowledge transfer are hence encouraged through this portal. One can always go back to the previous lessons to relearn or revise the fundamentals. This would ensure that one can clarify all the doubts and go back to the same training material over and over, which is not the case in most classroom training courses, where the onus is on the trainee to make proper notes. These notes could later be confusing, if pieces of information have been missed.

The learning management system is hence a great way to standardize the presentation of information irrespective of the field, be it healthcare or be it law. The system could be kept up to date by constantly modifying the content of the portals which is very easy. This would ensure that the latest advancements in a given field are always passed on to the students. This would also help them to not miss out on the latest happenings of any field. All in all this system can act as a comprehensive guide for continuing education, being the one place where students can find all relevant information.

Coggno can provide you with a flexible and easy to use learning management system for your continuing education courses. Call Coggno now at 888-585-9978 and inquire about trying out the system for free.

Amazing Porn Website with Free Access

This summary is not available. Please click here to view the post.

Papercraft Models


Useful hobbies are all around. Mine is to build paper models. When I was a child I built quite a few plastic kit models. Cars, aircrafts and military vehicles mostly. I thought I had some experience building scale models.

Then I tried building one using paper. There are no pre-made parts or shapes. When working with paper you have to form the parts before trying to install them to the correct place. Every part is a little model building task in itself. You'll probably have to print a part several times until you can bend and shape it correctly. If you are a beginner on this field, you'll need more time to get the shape you need. The only rule I found is to not give up.

It feels nothing short of terrific to start with a simple sheet of paper and build something spectacular. A little wonder, crafted of patience and manual dexterity on the forge of perseverance. As you spend time building these models, you'll find yourself to be a better and more experienced model builder.

Your initial efforts will turn into results and by the time you will have filled your shelves with "paper-horsepowers", you'll be rightfully proud of the creative pastime you'll have picked up along the way.

OK, let's get a bit closer. What's the first step to start building your model with? I suggest trying yourself first. Maybe it isn't for you. Don't buy many expensive tools, accessories, glue, maybe a new printer if you don't have those already. Choose a cheaper art knife with some spare blades and use some old newspaper to save the surface of you desk. These will do at the beginning. Any transparent glue recommended for paper is perfect for first-timers. Pick the non-toxic ones if possible. You can find many free models in all topics. Use your favorite search engine and type the followings:

"papercraft" + "your topic"

Change "your topic" phrase to what you like. It's simple as that.

Having downloaded the pattern, print it on the proper paper. The common typing-paper is not the right choice, because it's too thin and weak. It hasn't got the structural strength needed. The surface of the paper depends on your needs. If you are planning to assemble a car, for instance, I suggest to choose glossy paper. In case the real life model has matte surface, you'll want to use matte paper to print on. By the way you'll find it useful to combine the different paper types. I apply this technique often for complex models.

So, you've printed you first model. What to do? First, find a good box or tray for the cutaway parts! I think you don't want to waste your time searching for lost parts. If you don't have a container for the little parts you will lose them. It's a law of nature like the sky is blue, grass is green and little parts keep escaping...

Now, we have all the things we need to start. Grab your art knife and start to cut out the parts along the indicated lines. I have a technique to keep an organized layout. I never chop the paper into little confetti. I usually cut along the cut-lines only, that way you can find the part's inverse copy on the paper. This will helps you identify the parts later.

About the rulers... I think rulers are non-effective tools at this time. 99 times out of a hundred of I don't use a ruler. Rulers will slow you down and are generally unnecessary to cut the lines. I use it only if the line is very long... really.

Before you glue the parts together or bend them, it's recommended to paint the white edges. Much simpler to do this now than after the assembly. I used to paint the edges with felt tipped pen. This is the most efficient way I've found, because I can color the edges quickly and without many mistakes at all. Felt tipped pens are easy to buy, and not a costly investment.

You can start to bend the pieces now. There are two kinds of inflection exist: hard and soft. The type of the inflection will affect the final look of your model, so it's recommended to choose the right for every situation. You don't want to see hard edges on a nice smooth hood of a car even though it isn't flat... Check the environment of the mentioned parts and think a little.

Try to roll the paper slightly if you only need a curve. Maybe you need to do it several times till you get the right shape. Do it until the parts fit perfectly. Remember it's not a race, the results count not the speed of assembly.

I use a toothpick or often a little piece of a paper to glue the flaps. Every flap must be in the right position before fixing the parts to their place. Don't use too much glue, because it can make the paper wavy. You don't want to see that... The other extremity is using less glue than enough. The piece may seem to have been fixed properly, but when you try to connect it to another, the joint will burst. It cause other headache. So, always try to find the balance.

In the case of industrial style models, like cars it's recommended to proceed symmetrically. If you assemble the left side before following with the right, you will have discrepancies between them. In other words you won't make the same mistakes. It causes your car to be asymmetric. The human eye picks these differences up easily. So, if you'd bent the left door more than enough, do it with the right too. You can compensate for it later, but at the end your model will look symmetric. Symmetry is not so important on organic models.

As you make more and more papercrafts you'll become more experienced. You'll find solutions and way of doing things that fit you. Maybe, in time, you'll design your own scale-models. Every time you look at the model you had built, you'll realize how nice it looks. Nice and precious for you because it contains all those work hours. The truth is, it contains a little piece of you.